Lightning Protection Corp, Corporation

Two terminal type for bipolar protection between two points, e.g. plus to minus, or plus to ground, or minus to ground. Enclosure painted steel, mounting centers (4 holes) 5" X 1 1/8". Housing 4 1/2" X 2 7/8" X 2 5/8" H. For use on series or T connection, unlimited load current. Bipolar operation,...

Two terminal type for bipolar protection between two points, e.g. plus to minus, or plus to ground, or minus to ground. Mounting legs are terminals on 2 3/8" centers. Also available with top screw terminals. The housing is insulating, 1.6" X 1.0" X 2.0" H.

For use at : service entrance, transfer switch, distribution panels, and directly on the equipment itself requiring protection; at service entrance for line side or load side of the main disconnect means. Instantaneous and automatic in operation, no re-setting required. Conduction of overvoltage...

For use at : service entrance, transfer switch, distribution panels, and directly on the equipment itself requiring protection; at service entrance for line side or load side of the main disconnect means.Instantaneous and automatic in operation, no re-setting required. Conduction of overvoltage...

Three terminal type for bipolar protection between three points, e.g. plus to minus, plus to ground, minus to ground. Enclosure painted steel, mounting centers (4 holes) 6 3/4" X 2". Housing 6" X 4" X 3" H.

LIGHTNING PROTECTION CORPORATION manufactures railroad lightning arresters and Surge Protective Devices (SPD) for signals, communications, track, line, hump yard, control, DC traction : AC power circuits, 60-100 Hz, 120-700 VACTrack, line, yard, arresters with fail-safe mechanismsCode line, dataDC...

Miniature wire pair protector (4-20 ma transmitter protector). 2 lines and ground. 0.50" X 0.68" X 1.25" H. AWG 16 insulated leads. Protection maximum 30 KA, 8/20 µs line to line and each line to ground. Connections across the lines and to ground at or inside the equipment enclosure. Response less...

Data and signal lines protector. Maximum signal 28V peak line to line and each line to ground. In-line connection din rail mount. Clamping voltage starts at 30V. 5 stages of protection provided. Maximum surge current 30 KA, 8/20 µs wave. Either polarity of surge equally clamped. Temperature -55° to...

Wire pair protection, in-line installation, screw terminals. In-line impedance 10 ohms. For signal voltages 5 to 170V peak (AC and DC). Bipolar operation, instantaneous and automatic. Line terminals carry the surges, equipment terminals are protected. Mounting legs connected to ground. Surge...

MOV type, single and three phase. 120 to 480VAC, 60-100 Hz. All mode protection, L-G, L-N, N-G, L-L. Surge current rating 100 KA per mode. Enclosure safety bonding lug. AAR binding post terminals. Insulating shields optional (see photo, typical L terminal). Series or T connection for unlimited load...